With its advantages of long life, high lumen output, no mercury, and its feature of easy installation, Zhongshan Lijing LED Strip is designed to replace the halogen light, fluorescent tubes. Zhongshan Lijing LED strips suits a variety of environment, including hotel cove area, decoration lighting etc. Please read the installation instructions before installing the LED light.
Unpacking 1) Unpack and carefully examine the product. 2) Report any damage and save all packing materials if any part is damaged during transportation. 3) Do not attempt to use this apparatus if it is damaged.
Warnings 1) Risk of electric shock. Ensure that the power supply is off when wiring or soldering the sections of the device. 2) The device must be installed and operated by a qualified electrician or technician in accordance with relevant local codes.
User Responsibilities: It is the responsibility of the contractor, installer, purchaser, owner, and user to install, maintain, and operate the device in such a manner as to comply with all state and local laws, ordinances, and regulations.
Note: The instructions and precautions set forth in this user guide are not necessarily all-inclusive, all conceivable, or relevant to all applications as we cannot anticipate all conceivable or unique situations.

Planning the installation This device installation requires planning to ensure timely, successful installation with minimal complications and down time. Planning Suggestions Consult an Electrical Inspector to review all wiring plans. Create a Layout Plan drawing, per a Lighting Designer’s or Architect’s recommendation.
Description about LED strips:
The strip comes in a soft roll. The typical length for a roll is 16.4 foot but you can cut the strip every three or six LEDs. You can also connect the LEDs to make any shape you want and even bend the strip around a frame. A 16 foot roll consumes about 25 watts of power and produces light comparable to 240 watts from incandescent lighting.
The flexibility and very small footprint of LED flexible strip lighting allows one to customize it to almost any configuration. Additionally, as with other forms of LED lighting, one can choose from a variety of colors, including cool and warm white, and any combination of red, green and blue. Since the strip is operated under 12v/24v, it is very safe. These strips are also dimmable using either a wired or wireless dimmer.
Some typical usage scenarios include:
- Cove lighting
- Under cabinet lighting in kitchen
- Decoration lighting in shopping centers, hotels, etc.
- Marine lighting
- Patio lighting
- Architectural lights for canopy, corridor, window, archway,
- Backlight or edge lighting for signal
- DIY lights for home usage
- Path and contour marking
- Task lighting
- Decorative lighting for holidays, exhibitions and other events
- Frame light
-
1. LED Strip Specification

Input Voltage:12V DC with reversed polarity protect
Wattage:4.8W (3 feet)
LIGHT SOURCE:60pcs Super Flux LEDS/3ft
LED INPUT CURRENT:200mA/ft

Lumen:750-1100 lumen
Color:White, warm white, red, blue, green, R/G/B
Cut (Yes/No):Can be cut at every 3 LEDs, can be connected
Water proofed:Yes, IP68
Package size:16.4 feet (5 meter)/roll standard package. Other length is available per request.
Transformer is provided
II. LED Strip Installation.
A. Series LED Strips Installation I – 30W transformer operates one roll LED strip (16.4ft/roll)
1.Notes: The above series LED strips installation is used in the application where 30W transformer operates one roll LED strip (16.4ft/roll).
The extension code may be needed.
B. Series LED Strips Installation II – 60W transformer operates two rolls LED strip (16.4ft/roll), the transformer is in one side
2.Notes: The above series LED strips installation is used in the application where 60W transformer operates two rolls LED strip (16.4ft/roll).
The 16.4ft extension cord may be needed;
The two rolls LED strips need to be connected to the wire cord in parallel
The transformer is on the one side, two rolls of LED strips are laid on the same side
C. Series LED Strips Installation III – 60W transformer operates two rolls LED strip (16.4ft/roll), the transformer is in the middle
Notes: The above series LED strips installation is used in the application where 60W transformer operates two rolls LED strip (16.4ft/roll).
The 16.4ft extension cord may be needed;
The two rolls LED strips need to be connected to the wire cord in parallel;
The transformer is in the middle, one roll of LED strip is laid on the left side, one roll of LED strip is laid on the right side.